Table of Contents
Advertisement
2 Printer installation
2.1 Installation position
Flatly place the printer on the operation table, which must be
waterproof, moisture proof and dustproof. The maximal tilted angle
should not exceed ±15° during installation.
2.2 Paper roll installation
1) Hold the cover open lever with both hands to turn the top cover
upwards, and open the top cover of printer (see figure 2.2.1);
(see figure 2.2.1);
Figure 2.2.1
2) Press the cover open lever in the direction of arrow (see figure
2.2.2). After the ribbon holder is uplifted, turn it upwards to the
angle as shown in the figure (see figure 2.2.3);
3) Install the paper roll onto the paper roll holder, and add one
paper guide on each side of the paper roll (see figure 2.2.4);
Figure 2.2.2
- 5 -
LP 46 Neo User's Manual
Figure 2.2.3
Hide quick links:
Advertisement
Table of Contents
