TVS LP 46 NEO User Manual page 11

LP 46 Neo User's Manual
Figure 2.2.4 Figure 2.2.5
4) Place the paper roll on the holder into the paper cabinet, pull out
the front end of paper and spread it in the print path, and then
lead the paper go through under the buffer shaft and finally
clamp the paper pulled out with the left and right paper guides
(see figure 2.2.5).
Caution:
While opening the top cover, avoid pressing it with force, and
open the top cover with force towards upwards;
The print side of paper should face upwards. If it is marked paper,
please make the black mark face downwards;
The front end of paper should be located in the middle of platen
roller as possible as it can.
- 6 -