Power Adapter Connection; Communication Cable Connection - TVS LP 46 NEO User Manual

top cover of printer (see figure 2.3.3).
Caution:
Make sure the print method:
If selecting thermal transfer printing, the ribbon needs to be
installed;
If selecting thermal printing, there is no need to install ribbon.
Under normal condition, the width of ribbon selected should be
wider than that of print medium;
During the process of installing the ribbon, avoid the wrinkle or
damage of ribbon.

2.4 Power adapter connection

1) Ensure the printer is turned off;
2) Connect one end of the AC power input cable to power adapter,
and then insert the other end of the power adapter into the power
adapter interface on the back of printer;
3) Insert the other end of AC power input cable into the 220V power
socket.
Caution:
If leaving the printer idle for a long time, please disconnect the
power of printer.

2.5 Communication cable connection

1) Ensure the printer is turned off;
2) Insert the communication cable into the suitable interface, and fix
it with screw or latch spring of the plug;
3) Connect the other end of the communication cable to the host.
Caution:
Don't connect or disconnect the serial/parallel communication
LP 46 Neo User's Manual
- 10 -