Sensor Position Adjustment - TVS LP 46 NEO User Manual

printer will enter pause status if releasing the button after
pressing it down at this time.
Operations under pause status
The printer is under the status of stopping the printing task
temporarily. The printer will enter pause status under the
following situations:
1) Press down the button during normal printing;
2) After an exception is removed.
When the printer is in pause status, press the button for a short
time to resume the print task.
Operations under abnormal status
It refers to the status when an exception occurs. The printer
failure is prompted by LED and buzzer. For the details of failure
prompting and removing, refer to 5.1 Troubleshooting.

3.3 Sensor position adjustment

The sensor is assembled in the sensor holder, and it can move to
the left and right sides (see Figure 3.3.1). While loading the medium,
firstly adjust the paper guide, and then adjust the sensor holder
module. If black mark paper is used, please adjust the arrow on the
sensor holder module to be aligned with the black mark on the
medium. The specification of the medium used should meet the
requirements in Appendix 1.2.
LP 46 Neo User's Manual
- 19 -