Interfaces; Sensor Connectors - EDAN M3A User Manual

M3A Vital Signs Monitor User Manual
POWER Indicator

3.4 Interfaces

For the convenience of operator, interfaces of different functions are in different sites of the
monitor.
Sensor port on the front panel
Connectors for cables and sensors are as shown in Figure 3-9.
1. SpO sensor connector
2
2. NIBP cuff connector
Only connect the device to EDAN supplied or recommended accessories.
The LED beside this icon indicates the power condition.
When the monitor connects to the mains power supply, the
LED is bright.
Figure 3-9 Sensor Connectors
WARNING
- 20 -
Introduction