Interfaces - EDAN M8 Series User Manual

Patient Monitor User Manual
Operating method:
 Move the cursor to the item where the operation is required.
 Press the knob.
 One of the following four situations may appear:
1. The cursor with background color may become a frame without background color,
which implies that the content in the frame can change with the rotation of the knob.
2. Menu or measuring window may appear on the screen, or the original menu is
replaced by the new menu.
3. A check mark "
4. The system immediately executes a certain function.

3.4 Interfaces

For the convenience of operator, interfaces of different functions are in different sites of the
monitor. There is a USB port on the panel for connecting USB storage.
Right Side of the Monitor
At the right side of the monitor, there are a bracket of water trap for CO
recorder's paper inlet cover (②).
Left Side of the Monitor
Connectors for cables and sensors are as shown in the following figure.
1. CO sensor connector
2
2. IBP1 transducer connector
3. ECG cable connector
4. NIBP cuff connector
√
" appears at the position, indicating that the item is confirmed.
Figure 3-8 Right Panel
- 22 -
module (①) and the
2
①
②
Introduction