Replace Battery - EDAN M3A User Manual

M3A Vital Signs Monitor User Manual

Replace Battery

In monitoring or communication state, the battery status indicator will flash when the battery is
low or empty.
When the lifespan of battery is over, foul odor or leakage is detected, please contact the
manufacturer or local distributor for replacement of battery.
1 Do not take off the battery when monitoring. The unexpected power supply off can not
impact on the normal monitor working, if it has battery for standby.
2 Stop using the battery if abnormal heat, odor, discoloration, deformation or abnormal
condition is detected during use, recharge, or storage. Keep it away from the monitor.
3 Make sure the monitor is used in the appointed range of voltage, so the effect of
power supply can be ignored.
4 Before using the rechargeable lithium-ion battery (hereinafter called battery), be sure
to read the user manual and safety precautions thoroughly.
5 Do not place battery in the monitor with the (+) and (-) in the wrong way around.
6 Do not connect the positive (+) and negative (-) terminals with metal objects, and do
not put the battery together with metal objects, which can result in short circuits.
7 Do not heat or throw battery into fire.
8 Do not use, leave battery close to fire or other places where temperature may be
above +60 . Do not immerse, throw, and wet battery in water/seawater.
9 Do not destroy the battery, do not pierce battery with a sharp object such as a needle;
do not hit with a hammer, step on or throw to cause strong shock; do not disassemble
or modify the battery.
10 Take out the battery before cleaning or storing the monitor for more than 1 month.
WARNING
- 23 -
Introduction