Hardware Installation - Bosch FLEXIDOME IP starlight 8000i Series Installation Manual

FLEXIDOME IP starlight 8000i
5

Hardware installation

Caution!
Do not remove the bubble to move the camera lens manually.
The lens system is motorized for easy commissioning. Moving these parts manually will break
!
the gears and damage the camera. In order to move or focus the camera lens, always use the
motorized PTRZ controls mentioned in this manual. Removal of the bubble is only allowed for
bubble replacement.
Installation overview
The installation of the camera follows these steps:
1.
2.
3.
Bosch Security Systems B.V.
Installing the mounting plate, page 16.
Installing the camera base, page 20.
Installing the camera module, page 26.
Installation manual
Hardware installation | en
2019.07 | 02 |
15