Flymo SabreCut XT Operator's Manual page 6

Work positions:
To start the hedge trimmer:
1
q
6
The unit can be operated in 4 positions (illustration similar).
Side trimming:
Telescopic pipe
retracted
DANGER! Risk of physical injury!
Risk of injury if the unit does not stop when you
release the start button.
v Do not bypass the safety devices or switches. For example
do not attach the starting lock-out
the handle.
2
To start:
The unit is fitted with a starting lock-out
being turned on by accident.
1. Remove the protective cover
2. Hold the telescopic pipe of the unit with one hand and the
w
handle w
3. Push the starting lock-out
button e
The unit will start.
e
4. Release the starting lock-out
To stop:
1. Release the start button
2. Slide the protective cover
Vertical trimming
at high level:
Telescopic tube
extended
1
with the other hand.
q
forwards and push the start
.
q
.
e
.
1 over the blade
Horizontal trim- Trimming at low
ming at high level: level:
Motor unit tilted Motor unit tilted
by 75°, telescopic by – 60°,
pipe extended telescopic pipe
extended
q
or start button
q to prevent the unit from
from the blade 2 .
2 .
e
to