Danfoss VLT PROFIBUS DP MCA 101 Programming Manual page 47

Parameters
9-94 Changed Parameters (5)
Array [116]
No LCP Address
Read only
Range: Function:
0 [0 - 9999 ] This parameter shows a list of all the frequency
*
converter parameters deviating from default
setting.
16-84 Comm. Option STW
Range: Function:
0 [0 - 65535 ] View the extended fieldbus communication
*
option status word.
For more information, refer to the relevant
fieldbus manual.
16-90 Alarm Word
Range: Function:
0 [0 - 4294967295 ] View the alarm word sent via the serial
*
communication port in hex code.
16-91 Alarm Word 2
Range: Function:
0 [0 - 4294967295] View the alarm word sent via the serial
*
communication port in hex code.
16-92 Warning Word
Range: Function:
0 [0 - 4294967295 ] View the warning word sent via the serial
*
communication port in hex code.
16-93 Warning Word 2
Range: Function:
0 [0 - 4294967295] View the warning word sent via the serial
*
communication port in hex code.
16-94 Ext. Status Word
Range: Function:
0 [0 - 4294967295] Returns the extended warning word sent
*
via the serial communication port in hex
code.
MG37G202
Programming Guide
Danfoss A/S © 01/2016 All rights reserved.
6 6
45