Operating The Digital Top Box; Top Box Display; Start / Stop The Buggy; Turn The Buggy Off - MGI Zip Navigator User Manual

6.0 Operating the Digital Top Box

6.1 Top Box Display

4.
5.
6.
1. 3.

6.2 Start / Stop the Buggy

Zip Buggy Speed Control
Please note the following points regarding the Zip Buggy Speed
Control.
1. To select the desired speed, rotate the speed control button.
Turning the speed control button clockwise will increase the
speed, whilst anti-clockwise will decrease speed.
2. The speed setting chosen is displayed in the centre of the
screen.
Please note you will feel notches as you rotate the speed control. The notches do not
indicate a change in speed. The speed will only increase or decrease as the number
changes in the display.
3. To start the buggy at this desired speed, tap the top
of the speed control button.
4. Another tap will stop the buggy.
5. The desired speed can be altered up or down while
the buggy is moving.
12
1. Distance Mode Button
2. Unit Setting Button
3. ON / OFF Speed Control
Button
4. Speed Setting Indicator

5. Battery Level Indicator

6. Distance Mode
7. Distance
9.
8. Unit Measurement
9. Remote Battery
8.
Level Indicator
7.
2.
Speed Control

6.3 Turn the Buggy Off

Zip Buggy Battery
Please note the following points regarding the Zip buggy battery.
Connecting the Battery onto the Buggy
1 Position the battery on the buggy and push the battery
down to secure it. Push the battery handle down to connect
the battery to the buggy.
2. To turn the buggy Top Box Display off:
Hold down the Start/Stop Speed Control Button and Left
Hand Distance Mode Button for four seconds and the display
will turn off thereby disabling the Top Box.
Please note that the battery will still be connected to the buggy and will continue
to drain whilst connected.
3. Please note that the buggy display will also turn off if the
Speed Control is not operated for 30 minutes.
Once again, please note that the battery will still be connected
to the buggy and will continue to drain whilst connected.
4. To reactivate the Top Box Display, whilst the battery is
connected, hold down the Start/Stop Speed Control Button
and Left Hand Distance Mode Button for four seconds and
the display will turn on thereby enabling the Top Box.
5. To fully shut down the buggy and prevent the battery from
discharging, disconnect the battery by lifting its handle. The
battery can be left on or removed from the buggy.
6.4 Battery Level Indicator
Battery indication is located on the left side of the top box screen.
Four coloured bars are highlighted showing full charge. The
number of bars displayed, indicates the battery life available. You
should always check the battery status before you play golf to
ensure the four bars are there.

6.5 Unit Measurements

You can change from meters / kilometres / yards / miles simply by
pressing the Unit Setting Button [on the right].

6.6 Distance Modes

There are three distance measurement modes. To move between
the modes, press the Distance Mode Button [DM] on the left.
Distance A and B: resettable distance measurements can be
used to measure how far you hit your shot and to measure how
far you have walked for the day. To reset, simply press the DM
Button [left side] for 3 seconds until the reading displays "0".
Distance Total: cannot be reset as it is the odometer for the life of
the buggy. This feature will assist with service reminders which are
recommended at each 500km or 6 month period.
MGI Zip Navigator User Manual 13