Table of Contents
Advertisement
6.0 Front Wheel
Unlocking & Locking the Front Wheel
The front swivel wheel can be set in two positions.
1) Unlocked position to allow for 360deg swivel for optimum
turning ability. Move the knob, on top of the front wheel
assembly, to the left hand side.
2) Locked position is best when using the Controlled Distance
function. Move the knob, on top of the front wheel assembly,
to the right hand side.
7.0 Operating the Digital Top Box
7.1 Top Box Display
4.
5.
6.
7.
1.
3.
12
1. Distance Mode Button
2. Unit Setting Button
3. ON / OFF Speed Control
Button
4. Speed Setting Indicator
5. Battery Level Indicator
6. Distance Mode
7. Distance
8.
8. Unit Measurement
2.
7.2 Start / Stop the Buggy
ZIP Buggy Speed Control
Please note the following points regarding the ZIP Buggy Speed
Control.
1.
To select the desired speed, rotate the speed control button.
Turning the speed control button clockwise will increase the
speed, whilst anti-clockwise will decrease speed.
2.
The speed setting chosen is displayed in the centre of the
coloured screen.
Please note you will feel notches as you rotate the speed control. The notches do not
indicate a change in speed. The speed will only increase or decrease as the number
changes in the display.
3.
To start the buggy at this desired speed, tap the top
of the speed control button.
4.
Another tap will stop the buggy.
5.
The desired speed can be altered up or down while
the buggy is moving.
7.3 Turn the Buggy Off
ZIP Buggy Battery
Please note the following points regarding the Zip Buggy Battery.
Connecting the Battery onto the Buggy
1
Position the battery on the buggy and push the battery
down to secure it. Push the battery handle down to connect
the battery to the buggy.
2.
To turn the buggy Top Box Display off:
Hold down the Start/Stop Speed Control Button and Left
Hand Distance Mode Button for four seconds and the display
will turn off thereby disabling the Top Box.
Please note that the battery will still be connected to the buggy and will continue
to drain whilst connected.
3.
Please note that the buggy display will also turn off if the
Speed Control is not operated for 30 minutes.
Once again, please note that the battery will still be connected
to the buggy and will continue to drain whilst connected.
4.
To reactivate the Top Box Display, whilst the battery is
connected, hold down the Start/Stop Speed Control Button
and Left Hand Distance Mode Button for four seconds and
the display will turn on thereby enabling the Top Box.
Speed Control
MGI ZIP X5 User Manual
13
Hide quick links:
Advertisement
Table of Contents
