Front Wheel; Operating The Digital Top Box; Top Box Display; Start / Stop The Caddy - MGI ZIP series User Manual

6.0 Front Wheel

Unlocking & Locking the Front Wheel
The front swivel wheel can be set in two positions.
1) Unlocked position to allow for 360deg swivel for optimum
turning ability. Move the knob, on top of the front wheel
assembly, to the left hand side.
2) Locked position is best when using the Controlled Distance
function. Move the knob, on top of the front wheel assembly,
to the right hand side.

7.0 Operating the Digital Top Box

7.1 Top Box Display

4.
5.
6.
7.
1. 3.
12
1. Distance Mode Button
2. Unit Setting Button
3. ON / OFF Speed Control
Button
4. Speed Setting Indicator
5. Battery Level Indicator
6. Distance Mode
7. Distance
8.
8. Unit Measurement
2.

7.2 Start / Stop the Caddy

ZIP Caddy Speed Control
Please note the following points regarding the ZIP Caddy Speed
Control.
1. To select the desired speed, rotate the speed control button.
Turning the speed control button clockwise will increase the
speed, whilst anti-clockwise will decrease speed.
2. The speed setting chosen is displayed in the center of the
colored screen.
Please note you will feel notches as you rotate the speed control. The notches do not
indicate a change in speed. The speed will only increase or decrease as the number
changes in the display.
3. To start the caddy at this desired speed, tap the top
of the speed control button.
4. Another tap will stop the caddy.
5. The desired speed can be altered up or down while
the caddy is moving.

7.3 Turn the Caddy Off

ZIP Caddy Battery
Please note the following points regarding the Zip Caddy Battery.
Connecting the Battery onto the Caddy
1 Position the battery on the caddy and push the battery
down to secure it. Push the battery handle down to connect
the battery to the caddy.
2. To turn the caddy Top Box Display off:
Hold down the Start/Stop Speed Control Button and Left
Hand Distance Mode Button for four seconds and the display
will turn off thereby disabling the Top Box.
Please note that the battery will still be connected to the caddy and will continue
to drain whilst connected.
3. Please note that the caddy display will also turn off if the
Speed Control is not operated for 30 minutes.
Once again, please note that the battery will still be connected
to the caddy and will continue to drain whilst connected.
4. To reactivate the Top Box Display, whilst the battery is
connected, hold down the Start/Stop Speed Control Button
and Left Hand Distance Mode Button for four seconds and
the display will turn on thereby enabling the Top Box.
Speed Control
MGI ZIP X5 User Manual 13