Suzuki DF70A Owner's Manual page 34

If not equipped with Keyless Start System:
 WARNING
The power trim and tilt (PTT) switch can be
accidentally activated when the ignition key is
off, resulting in injury.
Keep all persons away from the outboard
motor to help prevent accidental activation of
the PTT system.
MANUAL TILTING
If you are unable to tilt the motor using the
"Power Trim and Tilt" because of an electrical
problem or some other problem, you can move
the motor manually. To tilt the motor up or
down, turn the manual release valve A two
turns counterclockwise, move the motor to the
desired position, then retighten the release
screw.
 CAUTION
The motor is very heavy. When you tilt it man-
ually, you could injure your back or slip and
fall causing injury.
When you tilt the motor manually, ensure that
your grip and footing are secure and that you
are able to support the weight of the engine.
34
TILT BRACKET
The Tilt Bracket is provided so you can support
the motor in a tilted position for non-moving
engine support.
To set the Tilt Bracket:
1. Tilt the motor all the way up using the Power
Trim and Tilt.
2. Pull down the Tilt Bracket as shown in the
illustration.
3. Lower the motor using the Power Trim and
Tilt, until the motor is supported by the Tilt
Bracket.
To release the Tilt Bracket, tilt the motor all the
way up using the Power Trim and Tilt "UP"
switch, and pull up the Tilt Bracket.
If equipped with Keyless Start System:
 CAUTION
The remote Power Trim and Tilt switch will
work when the Keyless start system is off. If
someone activates the switch while you are
moving the tilt bracket, your hand could be
injured.
Keep all persons away from the remote Power
Trim and Tilt switch while you are moving the
tilt bracket.