Table of Contents
Advertisement
Quick Links
355mm DRY METAL
CUTTING SAW
STOCK No. 52657 (240V)
STOCK No.
• INSTRUCTIONS •
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO
ENSURE THE SAFE AND EFFECTIVE USE OF THIS TOOL.
04/2001
This manual has been compiled by Draper Tools and is an integrated part of the power tool equipment, which should be kept with the
machine.
This manual describes the purpose for which this tool has been designed and contains all the necessary information to ensure its correct
and safe use.We recommend that this manual is read before any operation of the machine, before performing any kind of adjustment to
the machine, and prior to any maintenance tasks. By following all the general safety instructions contained in this manual, it will ensure
both machine and operator safety, together with longer life of the tool itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the machine.
Whilst every effort has been made to ensure accuracy of information contained in this manual, the Draper Tool policy of continuous
improvement determines the right to make modifications without prior warning.
55115 (110V)
GENERAL INFORMATION
PART No. CSM355
Advertisement
Table of Contents
Related Manuals for Draper CSM355
Summary of Contents for Draper CSM355
-
Page 1: General Information
04/2001 GENERAL INFORMATION This manual has been compiled by Draper Tools and is an integrated part of the power tool equipment, which should be kept with the machine. This manual describes the purpose for which this tool has been designed and contains all the necessary information to ensure its correct and safe use.We recommend that this manual is read before any operation of the machine, before performing any kind of adjustment to... -
Page 2: Table Of Contents
7 - 9 Maintenance ..........................Troubleshooting ......................... DECLARATION OF CONFORMITY Draper Tools Ltd. Hursley Road, Chandlers Ford, Eastleigh, Hampshire. SO53 1YF. England. Declare under our sole responsibility that the product: Stock No. 52657 and 55115 Part No:- CSM355 Description:- Metal Cutting Saw To which this declaration relates is in conformity with the following directive(s) 98/37/EEC, 73/23/EEC &... -
Page 3: Specification/Guarantee
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are not authorised. Your Draper guarantee is not effective unless you can produce upon request a dated receipt or invoice to verify your proof of purchase within the 12 month period. -
Page 4: Power Supply
(i.e. red). Fuse covers are available from your Draper Tools stockist. If the fitted plug is not suitable, it should be cut off and destroyed. *The end of the cable should now be suitably prepared and the correct type of plug fitted. -
Page 5: Safety Warning/General Safety Warning For Machine Tools
IMPORTANT Draper Tools Limited recommends that this machine should not be modified or used for any application other than that for which it Draper Tools Limited recommends that this machine should not be modified or used for any application other than that for which it was designed. -
Page 6: Additional Safety Rules For Metal Cutting Saws
ADDITIONAL SAFETY RULES FOR METAL CUTTING SAW 1. WARNING: Do not operate your metal 17. USE ONLY blade flanges specified for cutting saw until it is completely your machine. assembled and installed according to the instructions. 18. MAKE SURE blade is not contacting workpiece before switch is turned on. -
Page 7: Getting To Know Your Metal Cutting Saw
GETTING TO KNOW YOUR METAL CUTTING SAW ✕✌ ✕✖✌ ✜✌ ✖✌ ✗✌ ✕✚✌ ✘✌ ✕✛✌ ✕✘✌ ✕✗✌ ✙✌ ✛✌ ✕✙✌ ✕✕✌ ✕✜✌ ✚✌ ✢✌ ✕✔✌ Fig.1. Fig.1. ✕✌ Operating handle ✕✕✌ Clamping handle ✖✌ Trigger switch ✕✖✌ Upper blade guard ✗✌... -
Page 8: Operation And Use
POSITION: ✯✌ IMPORTANT:We suggest that when the machine is not in use, the switch be locked in the "OFF" position using a padlock (Draper Stock No.64164) ✰✌ ✰✌ through the holes in the switch trigger ✯✌. Fig.5. ADJUSTING DOWNWARD TRAVEL OF BLADE: Fig.6. - Page 9 OPERATION AND USE USING CLAMP DEVICE TO SECURE ✶✌ WORKPIECE: The clamp ✶✌ can now be pushed in or with- ✷✌ drawn to accommodate the workpiece. Tighten clamp using the clamping handle ✷✌. Fig.8. Fig.8. ANGLE CUTTER: ✺✌ Loosen screw ✹✌ with the hex. key provided. Then adjust fence ✺✌...
- Page 10 OPERATION & USE CHANGING THE BLADE: Fig.11. 1. DISCONNECT THE MACHINE FROM THE POWER SOURCE. ✼✌ 2. Loosen and remove the 3 screws ✼✌ and remove the blade cover ✽✌. Fig.11. ✽✌ 3. Press in on arbor lock ✾✌ and at the same time Fig.12.
-
Page 11: Maintenance
MAINTENANCE Brush inspection and replacement. Fig.15. CAUTION: Before inspecting the brushes, disconnect the machine from the power supply. BRUSH WEAR AND REPLACING BRUSHES Fig.16. On new machines check for brush wear after the first 50 hours of use, then every 10 hours. Replace brushes when they have worn down to 5mm. -
Page 12: Troubleshooting
TROUBLESHOOTING WARNING: FOR YOUR OWN SAFETY ALWAYS TURN THE MAIN SWITCH ON THE MACHINE “OFF” AND REMOVE THE PLUG FROM THE POWER SUPPLY BEFORE CARRYING OUT ANY MAINTENANCE OR TROUBLESHOOTING. Trouble Probable Cause Remedy Motor does not start. 1. Fuse. 1. - Page 13 NOTES - 12 -...
- Page 14 NOTES - 13 -...
- Page 15 NOTES - 14 -...
- Page 16 ©Published by Draper Tools Ltd. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.
Need help?
Do you have a question about the CSM355 and is the answer not in the manual?
Questions and answers