Connecting Additional Equipment - Sony KD-27FS170, KD-32FS170, KD-36FS170 Operating Instructions Manual

Connecting Additional Equipment

Connecting a DVD Player using Composite Video (VIDEO/AUDIO L(MONO),R)
Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your DVD player
to AUDIO/VIDEO IN on your TV.
Rear of DVD Player
Optional connection
❏
For better picture quality, use S VIDEO (located on the rear panel) instead of the yellow
video cable. S VIDEO does not provide sound, so you still must connect the audio cables.
Connecting a DVD Player using Component Video (YP
If your DVD player is equipped with component video outputs (YP
picture quality by using component video cables (480i only).
Rear of DVD Player
2
1
Make sure your DVD player is set up (see page 35). Using component video cables (not
supplied), connect YP
2
Connect AUDIO OUT on your DVD player to AUDIO IN on your TV.
✍
The YP P outputs on your DVD player are sometimes labeled Y, C
B R
connect the cables to like colors.
Optional connection
P (red)
R
P (blue)
B
Y (green)
1
P OUT on your DVD player to YP
B R
Rear of TV
ATSC ATSC
Audio R (red)
Audio L (white)
Video (yellow)
P R L)
B R
P ), you can improve the
B R
Rear of TV
ATSC ATSC
Audio L (white)
P IN on your TV.
B R
, and C or Y, B-Y, and R-Y. If so,
B R
Audio R (red)
7