Using The Remote Control Remote Control Description - Sony KD-27FS170, KD-32FS170, KD-36FS170 Operating Instructions Manual

Using the Remote Control
Remote Control Description
MUTING POWER
DISPLAY
A
B
SCREEN PICTURE
MODE MODE TV/VIDEO
C
D
1 2 3
4 6
5
7 9
8
5
0
ENT
VOL CH
JUMP
6
+
DIGITAL/
ANALOG
7
8
GUIDE MENU
9
0
RESET EXIT
qa
SLEEP
TV
RM-YD006
D Indicates feature available only in digital tuning mode.
Button
1
MUTING
qs
2 DISPLAY
qd
3 SCREEN
qf
MODE
4 PICTURE
MODE
qg
5
6 JUMP
qh
qj
7 DIGITAL/
ANALOG
qk
8 VOL
(volume)
9 GUIDE
0
qa RESET
POWER
qs
qd TV/VIDEO
qf
and
0 9
ENT
qg CH (channel) Press to change channels. The channel will change
qh MENU
Description
Press to turn off the sound. Press again or press VOL+
to restore sound.
Press once to display the current time (if set) and the
program status such as channel number, Channel
Label (if set), video input, Video Label (if set), and Info
Banner (if set). Press again to turn off the display.
D Press repeatedly the Screen Mode options. For details
on using Screen Mode, see page 17. Also available in the
Digital Setup menu (see page 32).
Press repeatedly to step through the available video
picture modes: Vivid, Standard, Movie, and Pro. Also
available in the Video menu. See "Using the Video
Menu" on page 21 for details.
D Use with 0-9 and ENT buttons to select digital
channels (for example, 2.1). For details on selecting digital
channels, see page 14.
Press to jump back and forth between the current
channel and the last channel that you selected. (JUMP
does not switch between analog and digital channels.)
Press to switch between digital and analog tuning
modes.
Press (+) or (–) to adjust the volume.
D Press to display the digital program guide. For
details, see page 15.
Press the arrow buttons to move the cursor in the on-
screen menus. Press the center button to select an
option. (If no menu or display is shown, pressing the
center button displays the Favorite Channels list.)
Press to return to factory settings while in an
on-screen menu.
Press to turn on/off the TV.
Press to cycle through available video inputs.
Press 0-9 to select a channel; the channel changes after
2 seconds. Press ENT to change channels immediately.
according to the current tuning mode (analog or digital).
To scan rapidly through the channels, press and hold
down the CH+ or CH- button.
Press to display and exit the analog menu. To display
the digital menu, see page 30. (For details, see page 18)
3