Using the Digital Setup
To use the Digital Setup Menu, use the following
steps:
To Display
To Highlight
v
Press
to highlight an option, then press
Applies only to digital channels that have 16:9 or widescreen aspect ratio. You
Screen Mode
cannot use Screen Mode for analog channels.
Enables you to change the picture size for digital channels.
Select from: Full, Zoom, Horizontal Expand, Vertical Expand. For
details, see "Using the Screen Mode Feature" on page 17.
✍
Caption Vision Applies to digital channels only. To set closed-caption options for analog
channels, see page 28.
Allows you to select from several closed caption modes (for programs that
are broadcast with closed captioning).
On
Off
Program
Diagnostics
Displays information about the currently tuned channel. For terrestrial
digital signals, displays the strength of the signal to help you adjust your
antenna to optimize signal reception.
Menu Color
Applies to digital menus only. You cannot set colors for analog menus.
Enables you to select a specific color for the on-screen menus.
32
Menu
To Select
In some cases, wide-screen programs will be shown in aspect ratios that require
the display of bars at the top and bottom of your 16:9 screen. For more details,
see page 36.
Caption Vision is turned on.
Caption Vision is turned off.
Allows you to set additional Caption Vision options. See
"Programming Caption Vision" on page 33.
Antenna
Digital Setup
Screen Mode
Caption Vision
Diagnostics
Menu Color
.
Full
On
Gray