Sony KD-27FS170, KD-32FS170, KD-36FS170 Operating Instructions Manual page 16

Connecting a TV and Satellite Receiver
Satellite receiver
1
Satellite
antenna
cable
1
Connect the cable from your satellite antenna to SATELLITE IN on your satellite receiver.
2
Connect the coaxial cable from your cable service or antenna to the VHF/UHF jack on
your TV.
3
Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your satellite
receiver to AUDIO/VIDEO IN on your TV.
✍
To watch video programs from your Satellite receiver, tune your TV to channel 3 or 4.
✍
You can use the
10
From
cable/
antenna
3
button to switch between the VHF/UHF and VIDEO inputs.
ATSC ATSC
2
Rear of TV
Audio R (red)
Audio L (white)
Video (yellow)