Additional Information; Connecting Additional Equipment - Sony KD-32NX100U Operating Instructions Manual

Connecting additional equipment

The following illustration shows how to connect a wide range of equipment to the rear of your TV. Please note that the connecting
cables are not supplied.
VCR
1. After you have connected your equipment, press the
Note: to record digital programmes you must connect your VCR to the Scart socket C using a scart lead.
2. Switch on your equipment to view the signal.
3. Press the DIGITAL/
Connecting a VCR that supports Smartlink
The Smartlink system offers a direct link between the TV and VCR. If you have a Smartlink VCR, please
refer to those instructions for further information.
Note: To operate correctly your VCR must be connected to the C socket of the TV using a fully wired 21 pin scart lead.
Connecting to external audio equipment
Plug in your Hi-Fi system to socket D if you wish to amplify the sound from the TV. The volume level can
still be adjusted using the volume button
Connecting your MD/ DAT player
Plug in your MD/DAT player to socket E.
Connecting a modem
Connect your modem to the F socket and your telephone socket.
C
DVD
correct symbol for your equipment appears on the TV screen (see table below).
On screen symbol
1
2
3
button when you wish to return to normal TV operation.
A D F
PlayStation
Hi-Fi
Usage
For equipment connected to socket A
For equipment connected to socket B
For equipment connected to socket C
on the remote control.

Additional information

B
E
MD/DAT
Modem
/ button on the remote control until the
31