Using The Clock/Timers Menu - Sony KD-27FS170, KD-32FS170, KD-36FS170 Operating Instructions Manual

Using the Clock/Timers
To access the Clock/Timers Menu,
use the following steps:
To Display To Highlight
v
Press to highlight an option, then press
Timer 1 Clock/Timers functions apply to analog channels only. You cannot set the Clock/
Timers for digital channels.
Timer 2
Scheduled Use the timers to program your TV to turn on and off by day, time,
viewing
duration, and channel. The timer duration is a maximum of six hours.
When the channel is fixed, it is not necessary to set the channel.
1
2
3
✍
Select Off to turn off the Timer. Your previous settings will be saved.
Current Time Set your TV to the current day and time. Press
Time menu:
1
2
✍
You must set the Current Time before you can use Timer 1 or Timer 2.
✍
When you perform Auto Program, Timer 1 and Timer 2 settings will be cleared. Also, in the event of
any loss of power, Current Time, Timer 1, and Timer 2 settings will be cleared.
Menu
To Select
V v
Use the or buttons to highlight Timer 1 or Timer 2, then press
.
V v
Use the or buttons to enter the desired day, start time, duration,
and channel, then press
Timer has been set, and the timer light on the front panel of the TV
should be on.
Press to exit the menu.
V v
Use the or buttons to enter the correct day and time, then press
.
Press to exit the menu.
Clock/Timers
T i m e r 1 : S e t
T i m e r 2 : S e t
C u r r e n t T i m e
Move
.
. The timer status should be On when the
Select End
to open the Current
27