Connecting Additional Equipment - Sony WEGA KV 20FV12 Operating Instructions Manual

Operating Instructions

Connecting Additional Equipment

TV and VCR
Coxial
Cable
1
From
cable/
antenna
1
Connect the coaxial cable from your TV antenna or cable service to
the IN jack on your VCR.
2
Connect a coaxial cable (not supplied) from the OUT jack on your
VCR to the VHF/UHF jack on the TV.
To watch video programs from your VCR, tune your TV to channel 3 or 4 (as
set on the rear of your VCR).
(Optional connection)
3
If your VCR is equipped with video outputs, you can get better
picture quality by connecting A/V cables (not supplied) from
AUDIO and VIDEO OUT on your VCR to AUDIO/VIDEO IN on
your TV.
You can use the
inputs.
For optimum picture quality, use S VIDEO (if your VCR is equipped with the
S VIDEO connection) instead of the yellow A/V cable. S VIDEO does not
provide sound, the audio cables must still be connected.
4
2
VCR
3 (Optional connection)
button to switch between the VHF/UHF and VIDEO
Rear of TV