Connecting Additional Equipment - Sony FD Trinitron WEGA KV-32FS13 Operating Instructions Manual

Connecting Additional Equipment
TV and VCR
Rear ofTV
VCR
From cable/
antenna
Optionat connection
To Watch video programs from your VCR, tune your TV to channel 3 or 4 (as
set on the rear of your VCR).
1
2
Connect the coaxial cable from your TV antenna or cable service to
the IN jack on your VCR.
Using a coaxial cable (not supplied), connect the OUT jack on your
VCR to the VHF/UHF jack on the TV.
Optional connection
If your VCR is equipped with video outputs, you can get better picture
quality by connecting Audio/Video cables (not supplied) from AUDIO
and VIDEO OUT on your VCR to AUDIO/VIDEO IN on your TV.
For optimum Picture quality, use S VIDEO instead Of the yellow Audio/Video
cable. S VIDEO does not provide sound; the audio cables must still be
connected.
You can Usethe w_::}_ button to switch between the VHF/UHE and VIDEO
inputs.
6