Okayo OTG-200 User Manual page 9

OmniTour Guiding System OTG‐200
 Mode Discussing
Any 2 discussion members (OTG‐200T) are allowed to talk freely. Other listeners (OTG‐200R) can only
be in listen mode at this occasion.
...

Power transmitter on and change its communication mode
 Press both  (○
 Default mode T EACHING shows up. Press the  or  button (○
mode.
 Press the power button (○
Transmitter will then be turned on automatically.

Assign your group channel
 Press both  and  buttons (○
on.
 Symbol disappears and press  or  button (○
 To confirm newly selected channel, press the power button (○
idled for 1 second to leave the setting automatically.

Power receiver on
 Now, press and hold the power button (○
 Press both  and  buttons (○
 Symbol disappears and press  or  button (○
transmitter.
 To confirm newly selected channel, press the power button (○
for 1 second to leave the setting automatically.
 D will show up on the screen to indicate correct connection with the transmitter. Note both
...
) and power (○ ) button to turn transmitter on.
8 9
) to confirm (underline) the selection and leave the setting.
9
) simultaneously to unlock the channel when transmitter is
8
) simultaneously to unlock the channel.
20
) to select another preferred channel.
8
) for 1 second to turn the receiver on.
21
) to select same channel as that on
20
6
) to select D ISCUSSING
8
) or leave the transmitter
9
) or leave the receiver idled
21