OmniTour Guiding System OTG‐200
Mic Gain
RF Power
Audio Priority
Simultaneous transmission for both AUDIO and
MIC. If this function is activated (ON), only
audio will be transmitted (MIC message will
be muted).
To confirm (underline) each selection, press the power button (○
When final selection is completed, the transmitter will exit the menu and automatically be
turned on afterwards.
Receiver
Press both (○
Following settings will show up in sequence for selection via or button (○
Channel Lock
Auto channel lock when the receiver is turned on.
Auto Power‐Off
Receiver will automatically be off if it does not get the
transmitter signal for 20 minutes.
Auto Power‐On
Receiver will automatically be powered on when leaving
charger.
Alarm
Out‐of‐range alarm will be activated if receiver does not get the
transmitter signal for 3 minutes.
Earphone Output
Earphone level can be tuned to be compatible with HAC users.
To confirm (underline) each selection, press the power button (○
When final selection is completed, the receiver will exit the menu and automatically be
turned on afterwards.
) and power (○
) buttons to turn receiver on.
20
21
17
1~5 (default: 3)
Hi
Low
ON
OFF
) and enter next setting.
9
ON
OFF
ON
OFF
ON
OFF
ON
OFF
Regular
HAC level
) and enter next setting.
21
).
20