Advertisement
OmniTour Guiding System OTG‐200
Adjust transmitter's or receiver's volume
Transmitter
Press or button (○
If channel‐lock function is deactivated (see paragraph of "Adjust default settings" on page 16),
volume adjustment will be invalid and default volume will be fixed at level 5.
Receiver
Tune the volume control (○
Total 11 volume levels are available and default level is set at 5. When level 0 is set, the device will
be muted.
Kindly note listening at highly volume for long periods may damage your hearing.
Connect external audio (Transmitter)
Transmitter is available for 3.5 mm audio connection via aux‐in jack (○
"Audio priority (default: OFF)" can be pre‐set upon preference
"Adjust default settings" on page 16.
To release the talk right of 2
"Discussing", make sure it is ○
applicable.
Power off
Press and hold the power button (○
transmitter/receiver off.
) to adjust the headphone volume on transmitter.
8
) on the side of receiver for adjustment.
14
nd
transmitter when it is at communication mode "Teaching (slave)" or
muted or ○
the audio cable is removed from aux‐in jack (○
i
ii
○
) till OFF shows up on the screen to turn
9
21
11
).
2
as advised in the paragraph of
), if
2
Hide quick links:
Advertisement
