Advertisement
OmniTour Guiding System OTG‐200
for 5 seconds for auto‐confirmation.
After selected channel is confirmed, signal indicator (○
talk/mute button (○
unification.
Now, turn receiver on and it will automatically be channel unified. New channel and correct
communication mode (G, T or D) will show up on its screen. Indication of successful or failed
channel unification is shown above.
Turn receiver off and then re‐turn it on if failed channel unification happens.
To release the transmitter from channel unification, simply short press the talk/mute button
(○
) again.
5
Communication mode (G, T or D) shown on receiver's screen varies upon transmitter from which
receiver acquires the signal.
Pair and unify your group channel
To complete following advanced functions, including roll‐call, calling/gathering alarm or
out‐of‐range alarm, prior pairing for all transmitters/receivers in the group is a must.
When the transmitter is at communication mode "Teaching", only master transmitter,
whose master/slave switch (
including roll‐call and calling alarm.
Press both call (○
unification.
Channel number on top flashes. Press the or button (○
To confirm newly selected channel, press the power button (○
) lights up in green. Transmitter is ready to send signal of channel
5
○
) is set at "m", can execute following advanced functions,
10
) and power (○
) buttons to turn transmitter on for group pairing and channel
6
9
) starts to flash quickly and the
3
(Successful pairing)
(Failed pairing)
8
13
) to select preferred channel.
) or leave the transmitter idled
9
Hide quick links:
Advertisement
