OmniTour Guiding System OTG‐200
To release receivers from being alarmed, simply press the alarm‐release button (○
To release the transmitter from calling alarm, simply short press the call button (○
Receivers will automatically be turned off if the alarm keeps on for 20 minutes.
Out‐of‐range alarm
Receivers will automatically start to vibrate and beep if they are out of transmitter's range for 3
minutes.
Out‐of‐range symbol (
light.
The alarm can only be released when receivers are within the operation range of the
transmitter again or the alarm‐release button (○
Receivers will automatically be turned off if the alarm keeps on for 20 minutes.
Out‐of‐range alarm can be deactivated upon preference as advised in the paragraph of "Adjust default
settings" on page 16.
Adjust default settings
Transmitter
Press both (○
Following settings will show up in sequence for selection via or button (○
Channel Lock
Auto channel lock when the transmitter is turned on.
Talk (setting)
) shows up and PTT button (○
) and power (○
) buttons to turn transmitter on.
8
9
16
) starts to flash quickly in red
17
) on receivers is short pressed.
18
ON
OFF
PTB: push to bolt
PTT: push to talk
PTM: push to mute
).
18
) again.
6
).
8