OmniTour Guiding System OTG‐200
If the receiver is set at T EACHING mode, make sure slave transmitter or any other receiver does
not occupy the talk right.
Receivers do not have the function of talkback if D ISCUSSING mode is set.
Channel unification failed to proceed on Transmitter
If the transmitter is set at T EACHING mode, make sure its master/slave switch (○
be "m" not "s".
If the transmitter is set at D ISCUSSING mode, make sure any 2
the talk right.
20
) is tuned to
10
nd
transmitter does not occupy