ZKTeco VF Series User Manual page 20

WIFI is the short of Wireless Fidelity. Our device has a built-in WIFI module to achieve the wireless
network function. Data transmit through WIFI, provides a wireless network environment for the
device.
WIFI Connection

Press Wireless Network on the Comm. Settings interface. Enable WIFI, the device will search
available WIFI in the network range.
Select an available WIFI. Input password and press [OK]. When the WIFI is connected successfully,
the initial interface will display the
address and other information.
Adding WIFI Network Manually

If you want to connect a WIFI network other from the available list, then you can add it manually.
Press Add WIFI Network on the Wireless Network interface to enter the relevant parameters
(The added network must exist).
Note: To find the added user name in the WIFI list for the connecting method, after manually
adding the WIFI network, please refer to
Advanced Setting

Press Advanced on the Wireless Network interface. Set the relevant parameters as required.
VF Series User Manual
logo. Select the connected WIFI signal to view the IP
WIFI Connection.
P a g e | 16