Shimano Ultegra R8050 Series Dealer's Manual page 81

INSTALLATION OF HYDRAULIC DISC BRAKE SYSTEM
Installation of the brake hose (easy hose joint system)
Insert the brake hose into the tool as shown in the illustration.
Check the location of the mark for cutting and secure the brake hose in place.
[1]
7
Check that the hose is secure and then attach the hose cutter.
Press the hose cutter as shown in illustration [2] to cut the brake hose.
[1]
8
(A)
Detach the hose cutter and check that the cut end is horizontal.
9
90˚ 90˚
To be continued on next page
[2]
[2]
81
NOTE
When inserting the brake hose into the tool,
align the mark for cutting with the groove in
the tool.
Mark for
cutting
(A)
Hose cutter
Groove