Shimano Ultegra R8050 Series Dealer's Manual page 57

INSTALLATION
Installation of junction A (EW-RS910)
Cut the end of the handlebar tape diagonally and wrap it over the handle holders as shown
in the illustrations.
6
(A)
7
(A) (B)
8
To be continued on next page
(A) (B)
Insert the end cap into the handlebar
(B)
end not fitted with junction A.
Attach the handle holders following the
same steps as for the handlebar end
fitted with junction A.
57
(A)
Handle holder
(B)
Handlebar tape
(A)
End cap
(B)
Handlebar
(A)
End cap
(B)
Handle holder