Shimano Ultegra SM-BCR1 - Battery Charger Manual

Main Specifications

Names of parts

• Charger (SM-BCR1)
  This charger is a special charger for use in charging Shimano lithium ion batteries (SM-BTR1).
  Never insert any other type of batteries, otherwise bursting or fire may occur.
  * Make sure that you thoroughly understand the general Safety Information for this product before use.
  
• Special battery (SM-BTR1)
  This is a lithium ion battery. Use the special charger (SM-BCR1) to charge it. Never use any other charger to charge the battery, otherwise bursting or fire may occur.
  
  Electrical contacts:
  If these are modified or damaged, problems with operation will occur. Be very careful when handling them.

Charging method

1. Insert the power plug of the charger into an electrical outlet.
2. Insert the battery (SM-BTR1) into the charger (SM-BCR1) as far as it will go.
   
   * The charging time is approximately 1.5 hours. (Note that the actual time will vary depending on the amount of charge remaining in the battery.)
3. When the CHARGE indicator (orange) switches off, charging is complete.
   
   * If the ERROR indicator fl ashes, it means that there may be a problem with the battery. Refer to "Error Judgment Details" for more information.
4. Disconnect the power plug of the charger from the electrical outlet and store the charger in a suitable place as specified in the Safety Precautions.

Error Judgment Details

What to do if an error occurs

• Remove the battery from the charger, disconnect the power plug of the charger from the electrical outlet, and then repeat the charging operation.
• If charging is still not possible after the above steps have been carried out, the ambient temperature may be too low or too high, or there may be a problem with the battery.
  
  
  If charging is not possible, the ERROR indicator on the charger will flash.

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS.

For connection to a supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet, if needed.
This power unit is intended to be correctly orientated in a vertical or floor mount position.

Battery to be recharged for this product is follows
Brand Name: SHIMANO
Battery Type: SM-BTR1
Rating: DC7.4V 500mAh

SHIMANO AMERICAN CORPORATION
One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003

SHIMANO EUROPE B.V.
Industrieweg 24, 8071 CT Nunspeet, The Netherlands Phone: +31-341-272222

SHIMANO INC.
3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan

Please note: specifications are subject to change for improvement without notice.
© Aug. 2014 by Shimano Inc. HTR

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Shimano Ultegra SM-BCR1 - Battery Charger Manual