Shimano SM-BCR1 Manual

SI-7DG0A-002-00
The following instructions must be observed at all times in order to prevent personal injury and physical damage to equipment
and surroundings.
The instructions are classified according to the degree of danger or damage which may occur if the product
is used incorrectly.
DANGER
Failure to follow the instructions will result in death or serious injury.
WARNING Failure to follow the instructions could result in death or serious injury.
Failure to follow the instructions could cause personal injury or physical damage to equipment and
CAUTION
surroundings.
Be sure to observe the following in order to avoid burns or other injury from fluid leakages, overheating, fire or
explosions.
Do not get the charger wet or use it while it is wet, and do not
touch or hold it with wet hands.
Do not cover the charger with a cloth or similar while it is in
use.
Do not disassemble or modify the charger.
Use the charger at the specified power supply voltage only.
Be sure to hold the power cable by the power plug when
connecting and disconnecting the power plug from the
electrical outlet.
Do not touch metallic parts of the charger or the AC adapter if
there is a lighting storm.
Do not overload the electrical outlet with appliances beyond its
rated capacity, and use only a 100 – 240 V AC electrical outlet.
Do not damage the power cord or power plug.
(Do not damage, process, forcibly bend, twist or pull them,
bring them near hot objects, place heavy objects on them or
bundle them tightly together.)
Do not use the charger with commercially-available electrical
transformers designed for overseas use, as they may damage
the charger.
Always be sure to insert the power plug as far as it will go.
Disconnect the power plug from the electrical outlet before cleaning the charger.
Technical Service Instructions
SM-BCR1
Battery Charger
Main specifications
Input
Output
Dimensions
Weight
Operating temperature
Storage temperature
DANGER
If this is not observed, problems with operation or electric
shocks may occur.
If this is not observed, heat may build up and the case may
become deformed, or fire or overheating may occur.
If this is not observed, electric shocks or injury may occur.
If a power supply voltage other than that specified is used,
fire, explosions, smoke, overheating, electric shocks or
burns may occur.
WARNING
If you do not hold the power cable by the power plug, fire or
electric shocks may occur.
* If heat or acrid-smelling smoke is coming out from the
power plug
* There may be a bad connection inside the power plug.
If lightning strikes, electric shocks may occur.
If the electrical outlet is overloaded by connecting too many
appliances using adapters, overheating resulting in fire may
occur.
If they are used while damaged, fire, electric shocks or
short-circuits may occur.
If this is not observed, fire may occur.
CAUTION
SI-7DG0A-002
100 -- 240 V AC, 50/60 Hz
8.4 V DC, 0.55 A
Approx. 100 mm (W) x 30 mm (H) x 72 mm (D)
Approx. 110 g
0 – 45 °C
-20 – 70 °C
Names of parts
Charger (SM-BCR1)
This charger is a special charger for use in charging Shimano lithium ion
batteries (SM-BTR1). Never insert any other type of batteries, otherwise
bursting or fire may occur.
* Make sure that you thoroughly understand the general Safety Information
for this product before use.
Electrical contacts:
Power cord
If these are modified or
connector
damaged, problems with
operation will occur.
Be very careful when
handling them.
ERROR indicator:
This flashes when there
is an error.
Power cord:
Insert into the connector.
CHARGE indicator:
* Insert as far as it will go.
This illuminates while
charging is in progress.
Charger cord
< Sold separately >
Type No.
USA/Canada : SM-BCC1 2
UK : SM-BCC1 6
Special battery (SM-BTR1)
This is a lithium ion battery. Use the special charger (SM-BCR1) to charge it.
Never use any other charger to charge the battery, otherwise bursting or fire
may occur.
Electrical contacts:
If these are modified or damaged,
problems with operation will occur.
Be very careful when handling them.
Charging method
1.
Insert the power plug of the charger into an electrical
outlet.
2. Insert the battery (SM-BTR1) into the charger (SM-
BCR1) as far as it will go.
* The charging time is approximately 1.5 hours.
(Note that the actual time will vary depending on
the amount of charge remaining in the battery.)
3. When the CHARGE indicator (orange)
switches off, charging is complete.
* If the ERROR indicator flashes, it
means that there may be a
problem with the battery. Refer to
"Error Judgment Details" for more
information.
4.
Disconnect the power plug of the
charger from the electrical outlet and
store the charger in a suitable place
as specified in the Safety Precautions.
Error Judgment Details
What to do if an error occurs
• Remove the battery from the charger,
disconnect the power plug of the
charger from the electrical outlet, and
then repeat the charging operation.
• If charging is still not possible after the
above steps have been carried out,
the ambient temperature may be too
low or too high, or there may be a
problem with the battery.
Illuminates orange
If charging is not possible, the
ERROR indicator on the charger
will flash.