INSTALLATION OF HYDRAULIC DISC BRAKE SYSTEM
Installing the brake caliper
In the case of a disc brake rotor for a 160 mm front wheel
1
(A)
(B)
To be continued on next page
Attach the mount bracket to the brake
(C)
caliper.
104
(A)
Mount bracket
(B)
Brake caliper mounting bolt B
(C)
Bolt fixing pin
Tightening torque
6 - 8 N·m
NOTE
•
Be sure to attach the bolt fixing pin.
Check that the bolt fixing pin is fully
inserted all the way to the rear.
•
Observe the direction indicated on the
mount bracket when installing it.