Danfoss VLT 380-500 V Design Manual page 82

Ordering Information
7.3.15 Remote Mounting Kit for the LCP
The LCP can be moved to the front of a cabinet by using
the remote built-in kit. Also available is an LCP Kit without
LCP. For IP66 units, the ordering number is 130B1117. Use
ordering number 130B1129 for IP55 units.
Enclosure
Maximum cable length between the LCP and
the unit
Communication standard
Table 7.13 Technical Data for Mounting an LCP to the IP66
Enclosure
64,5± 0.5 mm
(2.54± 0.04 in)
7 7
Panel
cut out
Illustration 7.18 Dimensions
80
®
VLT Parallel Drive Modules
IP54 front
3 m (9 ft. 10 in)
RS485
Illustration 7.19 Ordering Number 130B1113, LCP Kit with
Graphical LCP, Fasteners, Cable, and Gasket
Illustration 7.20 Ordering Number 130B1114, LCP Kit with
Numerical LCP, Fasteners, and Gasket
Danfoss A/S © 6/2016 All rights reserved. MG37N102