Table of Contents
Advertisement
TransportPro RS422 User Manual
Connecting
Connecting the TransportPro is straightforward. Connect the large 25 pin D-Sub
connector to the rear of the TransportPro. Secure the connector the TransportPro
by screwing the lock screws into the connector. Connect each video device or
video server to the smaller 9 pin D-Sub connectors. Some video servers have more
than one connector, which allow simultaneous control of the recorder and player. In
these cases, connect each port to its own connector on the TransportPro.
Lastly, connect the TransportPro to a source of power. This can be either from the
power mains using the provided power supply or directly from 9-12 volts DC. The
connector is a 2.1mm coaxial power connector. The center pin is positive. A power
switch on the rear panel turns the TransportPro on or off.
Connecting the TransportPro in your system is rather straightforward and easy. The
TransportPro comes with an attached breakout cable. The end has 1 connector
that connects directly to a video recorder. A power connector allows the
connection of an AC power adapter.
TransportPro Connected To A Video Deck
5
Advertisement
Table of Contents
