Controlling The Gangway - JLCooper Electronics TransportPro RS422 User Manual

Controlling the GangWay

Select Channel
To control the GangWay4, simply press the
Select Channel button. The display will show
Select Channel and indicate the selected
decks by illuminating buttons 1 -4.
To toggle the selection of a deck, press a numbered button.
Select Tally
To select the deck that shows it's timecode
on the TransportPro, press and hold the Tally
button then press a numbered button. The
TransportPro will indicate the deck selected
for Tally by illuminating buttons 1 -4.
Exiting GangWay Mode
To exit the GangWay4. mode, simply press
the Select Channel button so the
TransportPro displays the timecode from the
selected deck.
TransportPro RS422 User Manual
12
Select Channel
Select Tally
TC=.00:32:41:20