Table of Contents
Advertisement
SloMoPro USB User Manual
Connecting
Connecting the SloMoPro USB is straightforward. Simply connect the SloMoPro
USB to a free USB port on your computer. The SloMoPro USB is powered from the
USB port. The SloMoPro USB should be plugged into a self powered hub.
Drivers for the SloMoPro USB can be obtained from the downloads section of the
JLCooper website.
https://www.jlcooper.com/_php/downloads.php
To configure the SloMoPro USB to operate with a specific software application,
refer to the setup documentation for that software application.
5
Advertisement
Table of Contents
