Table of Contents
Advertisement
APPENDIX B: REPEATER
LIGHTNING PROTECTION
How To Minimize Lightning Damage for RPX
Repeater Series™ System.
General Information:
•
Please refer to Motorola R56 (part number:
6881089E50) Standards and Guidelines for
more in-depth details.
•
Make sure installation meet all Local and
State building codes in you area.
AC Line Requirements:
•
A commercial grade AC surge protector is
recommended for use with this product when
the power adapter is used.
Recommended part for this product:
Manufacturer: Transtector
Product Model: DSSL
68
RF Protection Instructions:
1.
Insert a Lightning Protector between the
repeater device and the antenna.
2.
The Lightning Protector must be grounded
using #6AWG.
3.
Please refer to "Figure 23. Direct Antenna
Mount (Dipole Antenna P/N HKAE4000)" on
page 69 and "Figure 24. Remote Co-Axial
Cable Mount (Magnetic Mount Antenna Kit
P/N HKKN4022)" on page 69 for more
connection details.
Note:
Port 2 (Mounting and ground nut side)
attaches to repeater port.
The recommended RF Protector part number for
this product is:
Manufacturer: HUBER+SUHNER
Part Number:3406.17.0029
Advertisement
Table of Contents
