Table of Contents
Advertisement
RF Cable Installation
Note:
The RF cable is 12 feet long. Keep this in
mind when locating the repeater.
In order to attach the RF Cable to the Repeater
(please refer to "Figure 12. Connecting RF Cable
to Repeater" on page 23), simply:
1.
Align the end of the RF Cable antenna
bushing with the repeater's RF antenna
connector.
2.
Turn the RF Cable bushing clockwise to
fasten it tightly.
Figure 12. Connecting RF Cable to Repeater
When installing the RF cable make sure that:
•
The RF Cable is taut.
•
The RF Cable doesn't go around the magnetic
mount antenna, antenna, the repeater device
or the power supply cable as all these can
cause electromagnetic interference (please
refer to "Figure 11b. Examples of Correct
Exterior Magnetic Mount Antenna Orientation"
on page 22 and "Figure 11c. Examples of
Incorrect Exterior Magnetic Mount Antenna
Orientation" on page 22 for examples of
wrong positioning).
•
If the cable is routed through a ceiling or wall
that connects outdoors, make sure there is an
appropriate sealing around the cable to
prevent water or other material from coming
permanently into the repeater.
Important
Installation Guide
Do not attempt to modify the RF cable
from its original design in any way.
23
Advertisement
Table of Contents
