Table of Contents
Advertisement
Installation Overview
Installing your repeater is a simple two-step process.
1
Choose an appropriate location for the Wireless Signal Repeater as described in the Installation Hints.
2
Plug the AC adapter into the wall and the module.
3
Register your Repeater module with your Wireless System Controller using a process called Discovery. Refer to
your Wireless System Controller documentation for instructions on how to discover your Wireless Signal
Repeater.
4
Mount the module, using either the tabletop base, or by following the instructions for wall mounting.
Installation Hints
The Motorola Wireless Signal Repeater is constructed of UV-resistant ABS plastic. Therefore, please consider the
following points when mounting the repeater:
•
If installing the repeater outside, it should be shielded from the elements, such as underneath a porch roof. Do
not install the repeater where it is subjected directly to the elements.
•
Typically, the repeater's wireless reception is good to up to 60–200 feet depending on indoor or outdoor use and
the number of obstacles. These can include metal framing, thick walls, and other wireless devices operating at
418 MHz. It is recommended that different positions be tried for optimal results.
3
Advertisement
Table of Contents
