Attaching The Antenna Tubes; Removing The Antenna Tubes - Sony DWT-B01N Operating Instructions Manual

Fig. 2
Attaching the Antenna
Tubes
Belt
Noise may occur if the antenna attachment areas come into
contact with metallic objects.
Attaching the antenna tubes will prevent accidental contact
of the antenna attachment areas with metallic objects.
Note
Do not pull on the antennas when attaching or removing
the antenna tubes. In addition, do not attach or remove the
Hook and loop
antenna tubes while holding the antennas. Doing so may
fastener
damage the antennas.

Attaching the antenna tubes

Hold the unit by its body with the antennas attached.
Gently grasp the antenna tube, and slowly slide it onto the
antenna all the way to the base of the antenna attachment
area.

Removing the antenna tubes

Hold the unit by its body with the antennas attached.
Gently grasp the antenna tube, and slowly slide it off the
antenna from the base of the antenna attachment area.
15