Attachment And Insertion Procedures; Attaching A Microphone Or A Cable - Sony WRT-8P Operating Instructions Manual

Note
+48 V power supply setting can be
performed when the INPUT selector is set
to either LINE or MIC. However, +48 V
power supply takes place when next time
the transmitter is turned on and the INPUT
selector is set to MIC.
12

Attachment and Insertion Procedures

Attachment and
Insertion
Procedures
Attaching a microphone or
a cable
1
Turn the connector ring clockwise.
2
Push the microphone or cable
connector (XLR-3-12C type
connector) against the audio input
connector of the unit until it is fully
inserted.
3
Turn the connector ring
counterclockwise to secure the latch.