Related Manuals for Sony DWT-B30/H
Summary of Contents for Sony DWT-B30/H
- Page 1 5-014-891-02 (1) Digital Wireless Transmitter Operating Instructions DWT-B30 © 2019 Sony Corporation...
-
Page 2: Table Of Contents
Notes on simultaneous multi-channel Table of Contents operation ............18 Note on microphone and transmitter combinations ............18 CROSS REMOTE Compatibility ......18 Features ..............3 Specifications ............19 Parts Identification ........... 4 Carrier Frequencies and Channel Steps ....20 Power Supply ............. -
Page 3: Features
Electronic Field Production (EFP). of 48 dB during mic input. The attenuator can be controlled remotely from the receiver. What is DWX? DWX refers to Sony’s new digital wireless microphone RF transmission output switching system. The DWX series reflects Sony’s extensive available expertise in professional microphones and sound design. -
Page 4: Parts Identification
European model Parts Identification Connector front view 1: GND 2: +5.2 V DC output (for power supply of lavalier microphone) 3: HOT (input impedance 4.7 kohms or more with +5.2 V DC) Connecting the microphone Microphone (optional) To secure the connection, turn the ring on the connection plug to lock it. -
Page 5: Power Supply
• When BATTERY TYPE is set to TYPE1, the power status is indicated based on the use of new LR6 (size For details, see “Battery indication” (page 5). AA) Sony Alkaline batteries. An incorrect indication may result when a different kind of batteries, a different I Menu display section brand of batteries or old batteries are used. -
Page 6: Setting The Transmission Channel
• Operation is not guaranteed on all USB power sources. Setting the Transmission Make sure to test the power source before using it. • The transmitter cannot be used when connected to a USB Channel device that possesses communication functions, such as a computer. -
Page 7: Using Cross Remote
Press the + or – button repeatedly until the GP/CH Using Cross Remote indication is displayed. Hold down the SET button until the item to be set flashes. This transmitter is equipped with a wireless remote control function that can be used to set the parameters (low-cut Press the + or –... -
Page 8: Using The Encrypted Transmission Function
goes up, RF REMOTE turns on, and the remote Using the Encrypted control function becomes operative. Transmission Function To use the Cross Remote with a previous pairing In the RF REMOTE indication, select ON. The unit is capable of transmitting encrypted signals to prevent unwanted surveillance. -
Page 9: Using The Password Mode (Password)
Exchange the encryption key. Basic Menu Operations On the receiver side, select REMOTE (wireless remote) as the encryption key exchange method, and perform encryption key exchange. REMOTE cannot be selected when the wireless Function name remote control function is disabled. Note If the receiver does not support AES256 mode, select SECURE KEY. -
Page 10: Setting Menus
Match the frequency range on this transmitter to that of the 3 dB steps 3 dB steps 3 dB steps Sony digital wireless receiver. –13 See “Carrier Frequencies and Channel Steps” (page 20) –10 for differences in frequency ranges that can be set for optional receivers combined with this transmitter. -
Page 11: Lock Function (Lock)
POWER: Locks POWER button operations only. TYPE1: The power status is indicated based on SETTING: Locks setting change operations only. characteristics of new LR6 (size AA) Sony Alkaline POWER+SETTING: Locks both POWER button and batteries. Select this for LR6 (size AA) alkaline batteries. -
Page 12: Audio Codec Mode Setting (Codec Mode)
For details, see “Using Cross Remote” (page 7). Audio codec mode setting (CODEC MODE) Audio phase switch function PHASE) MODE1: Audio codec mode that is compatible with first generation DWX-series devices. Switch the phase when a microphone that outputs with MODE2: Audio codec mode that prioritizes short delay inverted phase is connected. -
Page 13: Setting The Maximum Rf Output Power (Max Rf Power)
For details, see “Setting the maximum RF output power Automatic dimming of the display (MAX RF POWER)” (page 13). (DIMMER MODE) Setting the maximum RF output The organic light-emitting diode display can be set to dim or turn off after a certain amount of time. power (MAX RF POWER) AUTO OFF: The display turns off after 30 seconds. -
Page 14: Power Source Priority Setting (Power Priority)
- Pairing the unit or establishing encrypted transmission Attaching With the Soft with a different receiver. - Pairing the receiver that was paired with the unit with Case a different transmitter. - Establishing encrypted transmission between the receiver and a different transmitter. The transmitter can be attached to the user with the supplied soft case. -
Page 15: Removing The Unit From A Belt
Rear Fig. 2 Hook and loop fastener Belt Hook and loop fastener Front Removing the unit from a belt When the soft case is attached to a belt with the unit’s antenna pointing up, be careful to avoid getting the soft case’s hook and loop fastener caught on the belt during removal. -
Page 16: Block Diagram
Block Diagram US model Attenuator 1: +5.2 V (output) 2: HOT Digital signal processor 3: COLD 4: GND Head amp. Low-cut filter Audio High- A/D converter codec frequency modulator circuit Internal SG European model Attenuator 1: GND 2: +5.2 V (output) Head amp. -
Page 17: Troubleshooting
If you encounter a problem using this transmitter, use the following checklist to find a solution. For any problems with the receiver or adapter, refer to the operating instructions supplied with the respective device. If the problem persists, consult your Sony dealer. Symptom... -
Page 18: Important Notes On Operation
For details on updating the firmware on the DWX-series • Clean the surface and the connectors of the transmitter receiver or RMU-01 unit, contact your Sony with a dry, soft cloth. Never use thinner, benzene, alcohol representative. or any other chemicals, since these may mar the finish. -
Page 19: Specifications
Audio attenuator adjustment range (pad) 0 dB to 48 dB (3 dB steps, MIC input mode only) Microphone input connector 17 ( 63 (2 US model: Sony 4-pin (SMC9-4S) * 204 (8 (female) European model: Small 3-pin connector Mass Approx. 125 g (4.4 oz) -
Page 20: Carrier Frequencies And Channel Steps
Carrier Frequencies and Channel Steps Underlined values represent factory settings. US model Channel step: 25 kHz Model No. Frequency band Frequency Group/channel (factory setting) TV14-17 470.125 - 493.875 MHz 00 1801 494.125 MHz (TV14-TV36, TV38) TV18-21 494.125 - 517.875 MHz TV22-25 518.125 - 541.875 MHz TV26-29... - Page 21 Sony Corporation...