General Safety Rules - Drill Master XP User Manual

General Safety Rules

WARNING! Read and understand all instructions.
Failure to follow all instructions listed may result in
electric shock, fi re and/or serious injury. The term
"power tool" in all warnings listed herein refers to your
corded power tool.
WARNING! CHOKING HAZARD!
Small Parts – Not for children under 3-yrs.
Installation/Assembly
Carefully unpack the power tool and set it on the table. Check to
see that no damage has occurred in shipment. Check all packing
materials to be sure that all parts are present. See the section in
this User's Guide for part identifi cation diagram.
Drill Doctor
The
mounted securely to your workbench.
WARNING! Connect to properly wired (110V or 230V, as
applicable) outlet, or electrical shock may occur.
1. Work Area Safety:
a) Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
b) Do not operate power tools in explosive atmospheres, such
as in the presence of fl ammable liquids, gases or dust. Power
tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power
tool. Distractions can cause you to lose control. Do not let
persons not involved in the work touch the tool or power
cord.
d) Make workshop kid proof with padlocks, master switches or
by removing starter keys.
e) Securely mount this tool to your workbench during use.
2. Electrical Safety:
DANGER! Electrical shock can kill! Read, understand and
follow ALL safety instructions.
WARNING! Do not expose power tools to rain or wet
conditions. Water entering a power tool will increase the
risk of electric shock.
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodifi ed plugs
and matching outlets will reduce risk of electric shock.
4
® is completely assembled – it only needs to be
www.drilldoctor.com