Drill Master XP User Manual page 8

The drill bit sharpener
Hide thumbs Also See for XP:
Table of Contents

Advertisement

tools. Such preventative safety measures reduce the risk of
starting the power tool accidentally.
f ) Store idle power tools out of reach of children and do
not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power tools
are dangerous in the hands of untrained users.
g) Maintain power tools. Check for misalignment or binding
of moving parts, breakage of parts and any other condition
that may affect the power tool's operation. If damaged, have
the power tool repaired before use. Keep unit dry, clean
and free from oil and grease. Many accidents are caused by
poorly maintained power tools.
h) Keep guards in place and in working order. A guard or
other part that is damaged should be properly repaired or
replaced by an authorized service center unless otherwise
indicated in the instruction manual.
i) Never stand on the power tool. Serious injury could
occur if the tool is tipped or if the sharpening edge is
unintentionally contacted.
j) Check damaged parts. Before further use of the tool, a
guard or other part that is damaged should be carefully
checked to determine that it will operate properly and
perform its intended function. Check for alignment of
moving parts, binding of moving parts, breakage of parts,
mounting and any other conditions that may affect its
operation. A guard or other part that is damaged should
be properly repaired or replaced by an authorized service
center unless otherwise indicated in the instruction manual.
Have defective switches replaced by an authorized service
center. Do not use the tool if the switch does not turn it on
and off. Do not use if the grinding wheel is damaged. Use
only grinding wheels recommended by
5. Service
a) Have your tool serviced by a qualified repair person
using only identical replacement parts. This will ensure
that the safety of the power tool is maintained.
For Service in the USA, Contact:
Darex, LLC
PO Box 730
210 E Hersey St
Ashland OR
97520
8
Phone: (800) 418-1439
Fax: (541)552-1377
Email: info@darex.com
Drill Doctor
www.drilldoctor.com
.
®

Advertisement

Table of Contents
loading

Table of Contents