Chapter 5 Wiring - Mitsubishi Electric MELSEC iQ-F Series Reference Manual

5
WIRING
The following shows a wiring example for the iQ-F series programmable controller of Mitsubishi Electric Corporation, an
encoder, and a device.
(2) Absolute encoder
0V 24V 2 0 2
S/S 0V 24V X20 X21
COM4 Y20 Y21
No. Device
(1) FX5U(C)CPU
(2) Absolute encoder
(3) Device controlled by cam output FB
*1 When the filter is used in the input terminal, one-fourth of the constant is added as the difference (delay). Set the input response time
(digital filter setting value) to "None". For the setting method, refer to MELSEC iQ-F FX5 User's Manual (Application).
Gray code signal, etc.
1 2 2 2 3 2 4 2 5 2 6 2 7 2 8 2
X22 X23 X24 X25 X26 X27 X30 X31
• • • • • •
(3) Device controlled
by cam output FB
Remarks
The input number of X20 or later and output number of Y20 or later are recommended.
Resolution: 2048
Output format: sink output
9 2 10
X32
(1) FX5UCPU
Y76 Y77
5
*1
5 WIRING
29