Table of Contents
Advertisement
13.0
TROUBLESHOOTING
WARNING
!
ALWAYS LIGHT THE PILOT WHETHER FOR THE FIRST TIME OR IF THE GAS SUPPLY HAS RAN OUT,
WITH THE GLASS DOOR OPEN OR REMOVED.
TURN OFF THE GAS AND ELECTRICAL POWER BEFORE SERVICING THE APPLIANCE.
APPLIANCE MAY BE HOT, DO NOT SERVICE UNTIL APPLIANCE HAS COOLED.
DO NOT USE ABRASIVE CLEANERS.
SYMPTOM
PROBLEM
TEST SOLUTION
NOTE: If back up batteries are installed, they
must also be removed to re-program.
Check pressure readings:
Inlet pressure
Outlet pressure
AFTER TAKING PRESSURE READINGS, BE SURE TO
TURN SCREWS CLOCKWISE FIRMLY TO RESEAL. DO
NOT OVER TORQUE.
42.1B
- Quick Links:
- Finishing
- Replacements
Hide quick links:
Advertisement
Table of Contents
