Error Messages - Sony LDI-100B Operating Instructions Manual

Error messages

The following error messages may appear to indicate the status of the Personal LCD Display or input
signal.
OUT OF SCAN RANGE
The input signal does not match the supported specification.
Change the screen resolution on your PC. For details of the signal compatibility, see "Signal
compatibility" (page 22).
NO INPUT SIGNAL
The signal is not input.
• Make sure that the PC-VIDEO switch is correctly set.
• Make sure that the connected equipment is turned on.
• Make sure that your PC is not in the power saving mode.
HIGH TEMPERATURE
The Personal LCD Display temperature is high.
Turn off the Personal LCD Display for a while, then turn it on again.
Note
If you cover the ventilation openings of the power supply box, an error may occur due to a rise in temperature. In
addition, it may cause a fire or malfunction of the unit.
32
-US